- LED Light Source: SMD5050
- Power: 0.72W
- Waterproof: Waterproof
- Dimension: 67×16×7mm
- Trademark: OEM
- Emitting Color: RGB
- IP Rating: IP65
- LED Quantity: 3PCS
- Input V.: DC12 V
- Origin: Guangdong, China
|LED Quantity||3pcs SMD5050|
|Dimension (L x W x H)||67×16×7mm|
|Input voltage||DC 12V|
|Quantity||20pcs for a loop,more than 20pcs are connected another principal line.|
3)reverse channel letter
5)under cabinet lighting
6)shop window decoration
7)strip mall decoration
-- 160 degree wider beam angle
-- High light SMD5050 LEDs with heat sink
-- Constant current driver ensuring full bunch stably working
-- Best sealed with moisture-proof, water-proof, dust proof
and impact resistance.
-- Professional multi-optic design, better average brightness
and no lighting dots to eyes.
-- IP65 protection level.
-- Nice structure and injection molding process.
-- All raw materials with RoHS standard
-- Long lifespan and low failure rate
-- First position the module with double sided tape onto the back of board, then fix with Silicon glue.
-- Silicon glue directly fixing modules, but before installation, cleaning or polishing module surface.
-- Screw mounting the modules on the board.
1. each bunch of modules 20pcs, 5 bunches in 1 an anti-static bag, 1 bag 100pcs, 12 bags / carton, TTL:1200pcs / carton
2. Carton size: 520mm*460mm*260mm,
3. Gross Weight: 19kg (±5%)
4. The said packaging is subject to the above drawing shown here. Please take this for reference.
1.The output of power supply should be matched with the module's working voltage as module doesn't have short circuit protection, overloading protection. So the selected power supply should be the short circuit protection and overloading protection functions.
2.The +/- of the modules should be connected rightly: red-anode and white-cathode.
3. Max 20pcs in one bunch, better not more than this as it will cause lower brightness or danger. If need over 20pcs modules, suggesting connection first in series then parallels.
4.Power supply should be 20-30% more than the exact LEDs power, and wires should be a little bigger than the current which is needed.
5.Modules forbidden to be put into a inflammable substance, never be covered with a tight cover or onto the heat insulated sheet materials.
6.In case of installation or replacement, sure first to cut off power.
7.This type LED modules are not for dimmable function.
8.If there is something unusual ( dark or flickering), pls check firstly power is right on or output voltage is correct. If all is right, pls change the module.
9.This modules are only used for light boxes, signs which have cover to protect modules, not used in outdoor or directly opening conditions.