- LED Light Source: SMD3030
- 1 LED Power: 1W
- IP Rating: IP65
- Input V.: DC12 V
- Origin: Guangdong, China
- Emitting Color: White
- Power: 12W
- Waterproof: Waterproof
- Trademark: OEM
|Parameters (Room temperature =25ºC)|
|Surface Temp.||< 40||ºC|
|Working Temp.||-20 ~ +45||ºC|
|Storage Temp.||-30 ~ +60||ºC|
|Optical and Electrical Parameters (Room temperature =25ºC)|
|Test Items||Testing Condition||Symbol||Parameters||Unit|
-- 3030 1w LED source with heat sink, well heat transferring
-- Constant current driver ensuring full bunch in same brightness and stably working
-- Al substrate for LED and components in a low temperature condition
-- Secondary optic design, 160 degree visual angle resulting better average brightness and no brighter dots
-- Best sealed, IP65 with moisture-proof, water-proof, dust proof and impact resistance
-- Nice structure and design in PC process
-- All raw materials with RoHS standard
-- Long lifespan and low failure rate
1. Modules Positioning (Vertical and Horizontal)
|Light box thickness|
|Module horizontal distance|
1.The panel is 3mm acrylic board, 60% transmittance.
-- First position the module with double sided tape onto the back of board, then fix with Silicon glue.
-- Silicon glue directly fixing modules, but before installation, cleaning or polishing module surface.
-- Screw mounting the modules on the board.
1. each bunch of modules 20pcs, 5 bunches in 1 an anti-static bag, 1 bag 100pcs, 12 bags / carton, TTL:1200pcs / carton
2. Carton size: 520mm*460mm*260mm,
3. Gross Weight: 19kg (±5%)
4. The said packaging is subject to the above drawing shown here. Please take this for reference.
1.The output of power supply should be matched with the module's working voltage as module doesn't have short
circuit protection, overloading protection. So the selected power supply should be the short circuit protection and
overloading protection functions.
2.The +/- of the modules should be connected rightly: red-anode and white-cathode.
3. Max 20pcs in one bunch, better not more than this as it will cause lower brightness or danger. If need over 20pcs modules, suggesting connection first in series then parallels.
4.Power supply should be 20-30% more than the exact LEDs power, and wires should be a little bigger than the
current which is needed.
5.Modules forbidden to be put into a inflammable substance, never be covered with a tight cover or onto the heat
insulated sheet materials.
6.In case of installation or replacement, sure first to cut off power.
7.This type LED modules are not for dimmable function.
8.If there is something unusual ( dark or flickering), pls check firstly power is right on or output voltage is correct. If
all is right, pls change the module.
9.This modules are only used for light boxes, signs which have cover to protect modules, not used in outdoor or directly opening conditions.
10. Standard to: GB-24819 GB/T-24823 GB/T-24824